Sync Energy Wall Charger 2 1 Port 7.4kW Mode 3 Type 2 Plug Smart Tethered EV Charger Grey (462RW)
Tethered EV wall charger with Type A RCD (30mA AC + 6mA DC). Designed for dynamic charging up to 7.4kW for type 2 electric and hybrid vehicles. Equipped with Wi-Fi and LAN capabilities, auto lock, and supports solar charging to offer a smart, high-power and secure charging solution. Built-in solar function uses existing solar panels. No earth rod required, integrated open PEN conductor protection. For use with Sync Energy app. Can be used with interchangeable frontplates (sold separately).
- Works with - iOS App - Android App
- 230V AC Charging
- 7.5m Type 2 Tethered Cable
- Integrated DC Fault Protection, Short Circuit & Low / High Voltage Protection
- Waterproof & UV-Resistant
- IP55
- Must be Fitted by a Qualified and Registered Installer
- IK10 Impact Resistance
- Auto-Lock
- Hub Not Required
View all: Sync Energy Electric Vehicle Charging
Tethered EV wall charger with Type A RCD (30mA AC + 6mA DC). Designed for dynamic charging up to 7.4kW for type 2 electric and hybrid vehicles. Equipped with Wi-Fi and LAN capabilities, auto lock, and supports solar charging to offer a smart, high-power and secure charging solution. Built-in solar function uses existing solar panels. No earth rod required, integrated open PEN conductor protection. For use with Sync Energy app. Can be used with interchangeable frontplates (sold separately).
- Works with - iOS App - Android App
- 230V AC Charging
- 7.5m Type 2 Tethered Cable
- Integrated DC Fault Protection, Short Circuit & Low / High Voltage Protection
- Waterproof & UV-Resistant
- IP55
- Must be Fitted by a Qualified and Registered Installer
- IK10 Impact Resistance
- Auto-Lock
- Hub Not Required
View all: Sync Energy Electric Vehicle Charging
Best Sellers:
| Specification | |
|---|---|
| AC/DC Voltage & Charging | 230V AC Charging |
| Brand | Sync Energy |
| Cable Entry Points | Bottom & Rear |
| Charging Mode | Mode 3 |
| Colour | Grey |
| Communication Protocol | OCPP |
| Compatible with Solar Panels | Compatible with Solar Panels |
| Construction Material (Electrical) | Polycarbonate |
| Current Rating | 6-32 A |
| Display Type | Without Display |
| Domestic/Commercial Use | Suitable for Domestic & Commercial Use |
| EV Plug Type | Type 2 |
| EV Product Type | Stations |
| Fitting Requirements | Must be Fitted by a Qualified and Registered Installer |
| Frequency Band (Smart) | 2.4 GHz |
| Hertz (Hz) | 2.4 Hz |
| IK Rating | IK10 |
| IP Rating | IP55 |
| Initial Connection Network | WiFi |
| Internet Connection Required | Cloud Control (Internet Connection Required) |
| Manufacturer Guarantee | 2 Year Guarantee |
| Model Name | Wall Charger 2 |
| Model No | EVWC2T7G-01 |
| Mount Type | Wall Mounted |
| Network Standards (Full) | WiFi |
| No. of Bands | Single-Band |
| No. of Phases | Single-Phase |
| No. of Ports | 1 Port |
| Pack Size | 1 |
| Pieces in Pack/Case | 1 |
| Plug Type | Type 2 Plug |
| Power Rating (Watts Kw) | 7.4 kW |
| Power Type | Mains-Powered |
| Product Depth | 117 mm |
| Product Height | 305 mm |
| Product Type | Smart Tethered EV Charger |
| Product Width | 201 mm |
| RFID Card Included | RFID Card Not Supplied |
| Resistant Type | Waterproof & UV-Resistant |
| Smart Compatibility | App Controlled |
| Smart Hub Requirement | Hub Not Required |
| Standby Power Consumption | 4 W |
| Switched/Unswitched | Unswitched |
| Temperature Range | -25 to +40 °C |
| Total Product Weight | 4.315 kg |
| Wireless Range Restrictions | Electronic interference from appliances or physical obstruction, such as brick walls, metal frames and floors, can reduce the wireless range. A signal weakens every time it encounters an obstruction. |
| Works with Amazon Alexa | Does Not Work with Amazon Alexa |
| Works with Android App | Works with Android App |
| Works with Apple HomeKit | Does Not Work with Apple HomeKit |
| Works with Google Home | Does Not Work with Google Home |
| Works with Home Assistant | Does Not Work with Home Assistant |
| Works with Homey | Does Not Work with Homey |
| Works with Hubitat | Does Not Work with Hubitat |
| Works with Matter | Does Not Work with Matter |
| Works with Myko | Does Not Work with Myko |
| Works with Samsung SmartThings | Does Not Work with Samsung SmartThings |
| Works with iOS App | Works with iOS App |
| z1 - UK Manufacturer Name | Luceco UK Ltd |
| z2 - UK Manufacturer Postal Address | Luceco Distribution Centre, Stafford Park 1, Shropshire, TF3 3BD |
| z3 - UK Manufacturer Electronic Address | technical.support@luceco.com |
| z4 - EU Manufacturer Name | Luceco SE |
| z5 - EU Manufacturer Postal Address | Luceco SE Distribution Centre, C/ Bobinadora 1-5, Mataró, Barcelona, 8302, Spain |
| z6 - EU Manufacturer Electronic Address | es_ordersretail@luceco.es |
Product Contents
7.5m Type 2 tethered cable, 25mm compression gland, 25mm blind grommet, load management clamp and installation washers.